Tips on Troubleshooting Your Commercial Irrigation System

9/5/2020 (Permalink)

Check the irrigation system at your property

The irrigation system at your facility plays an important part in keeping your property aesthetically pleasing. Since a professional-looking property is inviting to visitors and prospective customers, you want to make sure your sprinkler system is working at top capacity. There are a few potential irrigation problems that can occur over time, so it's helpful to know a few troubleshooting tips.

Controller Doesn't Function Properly

If the water doesn't begin to spray when you turn on the system, a faulty controller may be the issue. Each spring before you turn on your sprinkler system in Bensalem, PA, make sure that all of the wires connected to the controller are in excellent condition. The wires inside the valve boxes should also be inspected, since they are the most prone to weather damage.

Water Pressure Is Too Low or Too High

In the case of low water pressure, make sure there isn't any blockage in or around the sprinkler head. If there isn't, you may have an underground leak that requires a professional to inspect.
If sprinkler heads begin to mist rather than spray a constant flow of water, this could indicate water pressure that is too high. If the pressure is too high, it can wear out the irrigation system quickly.

Sprinkler heads that help regulate water pressure are available if pressure is an issue.
Sprinkler Head Won't Pop Up
There may be something preventing the sprinkler head from popping up. Inspect for dirt or debris causing the head to stick.

Water Accumulates on the Lawn
Water that pools on the lawn can indicate a leak in the system, but improper drainage may also be the problem. If adjusting the watering schedule doesn't solve the problem, you should call a professional water repair service as soon as possible to avoid further water damage to the property.
Check the irrigation system at your property periodically so that it works at maximum efficiency.